Rexroth PV/270+PV092 Pump

Rexroth PV/270+PV092 Pump is a two-position pump with high pressure and great flow. This product has high precision, strong durability and reliability under long-term use. Rexroth PV/270+PV092 Pump is compact in design, small in volume, easy to install and maintain.

Contents hide

Features

Dimensions

Technical data

Rexroth PV/270+PV092 Pump Service Manual

Features

Variable displacement
Low operating noise
Extended bearing life cycle due to hydrodynamically lubricated plain bearings
Pressure and flow can be controlled
Low hysteresis
Very low control up times and down control times
Mounting dimensions according to ISO 3019-2
Connection dimensions according to ISO 6162-1 and ISO 228-1
Suitable for HLP, HETG, HEES and HFD-U hydraulic fluids
Standard Series PV7 single pumps can be combined with multiple pumps as well as internal gear, external gear, axial piston and radial piston pumps.
Used for drives in continuous operation with variable flow requirement and a high share in the pressure holding function, e.g.:
– machine tools
– hydrostatic bearings
– constant pressure systems

Dimensions

Technical data

1X
4-hole flange according to VDMA 24560 part 1 and ISO 3019-2
Pipe thread or SAE flange connection (depending on frame size)
any, preferably horizontal
From one turn of pressure adjusting screw (see Product Description Pos. 15) approx. 19 bar
Radial and axial forces cannot be absorbed!
Clockwise rotation (looking at the shaft end)
n	900 … 1800
14	20	20	30	30	45	45	71	71	94	118	150
6.3	5.8	8.5	6.8	13.7	10.2	20.5	16.5	33	20.9	51.5	33
90		140		180		280		440		680
21	29		43.5		66		104	108	136	171	218
2.7	1.9	4	2.5	5.3	3.2	6.5	4	8	5.3	11	7.3
0.8 … 2.5
20
160	100	160	80	160	80	160	80	160	80	160	80
2
m	12.5		17		21		30		37		56
10		14		18		25		34		46

1) Measured with n = 1450 rpm; p = pmax; v = 41 mm2/s
2) Measured n = 1450 rpm, p = 10 bar and v = 41 mm²/s
3) With operating pressure output = pmax
4) With pressure controller
5) With one rotation of the set screw and n = 1450 rpm